For a 60 degree thread, best wire size = 0.57735 x pitch and measurement over wires M = major diameter - 1.5155 x pitch + 3 x wire. A 1/2-13 with best wires (0.0444 inch) measures about 0.5167 inch over the wires at basic pitch diameter.
P is the pitch (1 / TPI, or mm). E is the basic pitch diameter. Real threads are cut slightly under basic by their class tolerance, so a good external thread measures a little below this M.
Tools that match your numbers
Three-wire sets that cover your pitch
Shown when your pitch is inside the range each listing gives.
Nothing we carry is listed for that number. Change a value above, or compare the wider range below.
- Smaller option, below your number48 Pcs Thread Measuring Wire SetUnder $25
Your thread pitch is 1.954 mm (13 TPI), inside the range the listing gives: 3 to 48 TPI and 0.5 to 6 mm, 16 wire sizes.
Check price on Amazon - Smaller option, below your numberBrown & Sharpe 0.5 to 6mm Thread Measuring Wire Set 3 to 48 TPIUnder $100
Your thread pitch is 1.954 mm (13 TPI), inside the range the listing gives: 3 to 48 TPI and 0.5 to 6 mm.
Check price on Amazon - Smaller option, below your numberShars Thread Measuring Wire Set 303-9390 PUnder $25
Your thread pitch is 1.954 mm (13 TPI), inside the range the listing gives: 3 to 48 TPI, 16 wire sizes.
Check price on Amazon
Micrometers that reach your reading over the wires
The measurement over wires is taken with an outside micrometer. Matched on the listed range.
Nothing we carry is listed for that number. Change a value above, or compare the wider range below.
- Smaller option, below your numberHDLNKAK Outside Micrometer 0-1"Under $25
The reading over the wires is about 0.5167 in, inside this micrometer's listed 0-1 in range.
Check price on Amazon - Smaller option, below your numberFowler 52-253-001-1Under $50
The reading over the wires is about 0.5167 in, inside this micrometer's listed 0-1 in range.
Check price on Amazon
Tools for this job
The tooling this calculation is usually for, spread across the price range.
How does the three-wire thread measurement calculator work?
Three-wire measurement checks a thread at its pitch diameter, where the flanks actually bear, using a micrometer and three identical wires laid in the thread. It is how you know a thread cut on the lathe will fit a nut you do not have in hand.
Frequently asked questions
Why is it called the best wire size?
The best wire touches the thread flanks exactly at the pitch diameter, so small errors in the thread angle have almost no effect on the reading. For a 60 degree thread it is 0.57735 times the pitch. Wires a little larger or smaller still work with the formula, but angle errors creep in.
Keep going
Formulas are standard shop math; starting speeds are conservative conventions for hobby machines. Not professional engineering advice. Wear eye protection and keep hands, gloves and sleeves clear of rotating work.