A #2 drill measures 0.2210 inch (5.613 mm). The closest fractional drill is 7/32" (0.2188") and the closest metric drill is 5.6 mm (0.2205").
What are the #2 drill equivalents?
| Drill | System | Decimal (in) | mm | Difference (in) |
|---|---|---|---|---|
| #2 | number | 0.2210 | 5.613 | 0 |
| 7/32" | fraction | 0.2188 | 5.556 | -0.0022 |
| 5.6 mm | metric | 0.2205 | 5.600 | -0.0005 |
Drill sets that include this size
Number and letter sizes come in indexed sets; buy the set rather than single drills.
What speed should a #2 drill run?
| Material | RPM (HSS) | Feed (in/rev) |
|---|---|---|
| 6061-T6 aluminum | 3,457 | 0.0044 |
| 360 free-machining brass | 2,593 | 0.0040 |
| 1018 cold rolled steel | 1,383 | 0.0033 |
| 304 stainless steel | 691 | 0.0022 |
Starting points from conservative HSS drilling speeds. Small drills often call for more RPM than a benchtop drill press offers; run at the top speed and feed gently. Use cutting oil in steel and stainless, and clamp the work: never hold it by hand.
Cutting fluid for drilling
Frequently asked questions
What is a #2 drill in inches?
0.2210 inch, which is 5.613 mm. Number drills get smaller as the number rises, so the next number up is a smaller drill. If you do not have this exact size, 5.6 mm is within 0.0005 inch.
What tap uses a #2 drill?
No common UNC or UNF thread uses it as its standard 75% tap drill, but it often serves as an alternative drill for a slightly different percentage of thread, or as a clearance or pilot size. The tap drill chart lists every standard pairing.