A #43 drill measures 0.0890 inch (2.261 mm). The closest fractional drill is 3/32" (0.0938") and the closest metric drill is 2.3 mm (0.0906"). It is the standard tap drill for #4-40.
What are the #43 drill equivalents?
| Drill | System | Decimal (in) | mm | Difference (in) |
|---|---|---|---|---|
| #43 | number | 0.0890 | 2.261 | 0 |
| 2.2 mm | metric | 0.0866 | 2.200 | -0.0024 |
| 2.3 mm | metric | 0.0906 | 2.300 | +0.0016 |
Tap drill for: #4-40.
Drill sets that include this size
Number and letter sizes come in indexed sets; buy the set rather than single drills.
What speed should a #43 drill run?
| Material | RPM (HSS) | Feed (in/rev) |
|---|---|---|
| 6061-T6 aluminum | 8,584 | 0.0018 |
| 360 free-machining brass | 6,438 | 0.0016 |
| 1018 cold rolled steel | 3,433 | 0.0013 |
| 304 stainless steel | 1,717 | 0.0009 |
Starting points from conservative HSS drilling speeds. Small drills often call for more RPM than a benchtop drill press offers; run at the top speed and feed gently. Use cutting oil in steel and stainless, and clamp the work: never hold it by hand.
Cutting fluid for drilling
Frequently asked questions
What is a #43 drill in inches?
0.0890 inch, which is 2.261 mm. Number drills get smaller as the number rises, so the next number up is a smaller drill. If you do not have this exact size, 2.3 mm is within 0.0016 inch.
What tap uses a #43 drill?
It is the standard 75% thread tap drill for #4-40. Tap drills are chosen to leave about 75% of full thread depth, the balance of strength and tapping torque that published charts use.