0.375" thick copper plate and sheet weighs 17.442 lb per sq ft (85.16 kg per sq m). Weight = cross-section area x length x 0.323 lb per cubic inch.
How much does copper plate and sheet weigh per square foot?
| Size | Area (sq in per inch width) | lb per sq ft | kg per sq m | 4 x 8 ft sheet, lb |
|---|---|---|---|---|
| 0.0625" thick | 0.0625 | 2.907 | 14.19 | 93.0 |
| 0.125" thick | 0.1250 | 5.814 | 28.39 | 186.0 |
| 0.1875" thick | 0.1875 | 8.721 | 42.58 | 279.1 |
| 0.25" thick | 0.2500 | 11.628 | 56.77 | 372.1 |
| 0.375" thick | 0.3750 | 17.442 | 85.16 | 558.1 |
| 0.5" thick | 0.5000 | 23.256 | 113.55 | 744.2 |
| 0.75" thick | 0.7500 | 34.884 | 170.32 | 1116.3 |
| 1" thick | 1.0000 | 46.512 | 227.09 | 1488.4 |
Formula: weight per square foot = 144 x thickness x density; weight = area x length x 0.323 lb/in3. For any other size use the metal weight calculator.
Cut and measure your stock
Frequently asked questions
How do you calculate the weight of copper plate and sheet?
Multiply the cross-section area in square inches by the length in inches and by the density, 0.323 lb per cubic inch for copper (110). For this shape the area is: weight per square foot = 144 x thickness x density. A foot of stock is 12 inches, so weight per foot is area x 12 x 0.323.
How does copper compare with steel by weight?
Copper is 14% heavier than carbon steel for the same size: 0.323 lb per cubic inch against 0.2836. The same bar or plate in copper weighs 1.14 times the steel figure.
Other copper shapes
Plate and sheet in other metals
Keep going
Weights from typical published densities; actual alloys and mill tolerances vary by a few percent. Not an engineering load calculation.