0.5" x 2" titanium flat bar weighs 1.920 lb per ft (2.86 kg per m). Weight = cross-section area x length x 0.16 lb per cubic inch.
How much does titanium flat bar weigh per foot?
| Size | Area (sq in) | lb per ft | kg per m | 12 ft length, lb |
|---|---|---|---|---|
| 0.125" x 1" | 0.1250 | 0.240 | 0.36 | 2.9 |
| 0.25" x 1" | 0.2500 | 0.480 | 0.71 | 5.8 |
| 0.25" x 1.5" | 0.3750 | 0.720 | 1.07 | 8.6 |
| 0.25" x 2" | 0.5000 | 0.960 | 1.43 | 11.5 |
| 0.375" x 2" | 0.7500 | 1.440 | 2.14 | 17.3 |
| 0.5" x 2" | 1.0000 | 1.920 | 2.86 | 23.0 |
| 0.25" x 3" | 0.7500 | 1.440 | 2.14 | 17.3 |
| 0.5" x 3" | 1.5000 | 2.880 | 4.29 | 34.6 |
| 0.5" x 4" | 2.0000 | 3.840 | 5.71 | 46.1 |
| 0.5" x 6" | 3.0000 | 5.760 | 8.57 | 69.1 |
Formula: area = width x thickness; weight = area x length x 0.16 lb/in3. For any other size use the metal weight calculator.
Cut and measure your stock
Frequently asked questions
How do you calculate the weight of titanium flat bar?
Multiply the cross-section area in square inches by the length in inches and by the density, 0.16 lb per cubic inch for titanium (6Al-4V). For this shape the area is: area = width x thickness. A foot of stock is 12 inches, so weight per foot is area x 12 x 0.16.
How does titanium compare with steel by weight?
Titanium is 44% lighter than carbon steel for the same size: 0.16 lb per cubic inch against 0.2836. The same bar or plate in titanium weighs 0.56 times the steel figure.
Other titanium shapes
Flat bar in other metals
Keep going
Weights from typical published densities; actual alloys and mill tolerances vary by a few percent. Not an engineering load calculation.