2" x 2" x 0.1875" brass angle weighs 2.633 lb per ft (3.92 kg per m). Weight = cross-section area x length x 0.307 lb per cubic inch.
How much does brass angle weigh per foot?
| Size | Area (sq in) | lb per ft | kg per m | 12 ft length, lb |
|---|---|---|---|---|
| 1" x 1" x 0.125" | 0.2344 | 0.863 | 1.28 | 10.4 |
| 1.25" x 1.25" x 0.125" | 0.2969 | 1.094 | 1.63 | 13.1 |
| 1.5" x 1.5" x 0.125" | 0.3594 | 1.324 | 1.97 | 15.9 |
| 1.5" x 1.5" x 0.1875" | 0.5273 | 1.943 | 2.89 | 23.3 |
| 2" x 2" x 0.1875" | 0.7148 | 2.633 | 3.92 | 31.6 |
| 2" x 2" x 0.25" | 0.9375 | 3.454 | 5.14 | 41.4 |
| 3" x 3" x 0.25" | 1.4375 | 5.296 | 7.88 | 63.5 |
| 4" x 4" x 0.375" | 2.8594 | 10.534 | 15.68 | 126.4 |
Formula: area = thickness x (leg A + leg B minus thickness); weight = area x length x 0.307 lb/in3. Corner radii are ignored, so real stock runs one to three percent lighter than the table. For any other size use the metal weight calculator.
Cut and measure your stock
Frequently asked questions
How do you calculate the weight of brass angle?
Multiply the cross-section area in square inches by the length in inches and by the density, 0.307 lb per cubic inch for brass (360). For this shape the area is: area = thickness x (leg A + leg B minus thickness). A foot of stock is 12 inches, so weight per foot is area x 12 x 0.307.
How does brass compare with steel by weight?
Brass is 8% heavier than carbon steel for the same size: 0.307 lb per cubic inch against 0.2836. The same bar or plate in brass weighs 1.08 times the steel figure.
Other brass shapes
Angle in other metals
Keep going
Weights from typical published densities; actual alloys and mill tolerances vary by a few percent. Not an engineering load calculation.