2" x 2" x 0.1875" bronze angle weighs 2.762 lb per ft (4.11 kg per m). Weight = cross-section area x length x 0.322 lb per cubic inch.
Cut and measure your stock
- Metal bandsawDEWALT - GID-298457 Portable Band SawUnder $500Check price on Amazon
- Bandsaw bladeAYAO 64-1/2 inch X 1/2" X 14TPI Bimetal M42 Bandsaw Blades for Metal...Under $25Check price on Amazon
- CaliperiGAGING 6-Inch 150 mm Dial CaliperUnder $50Check price on Amazon
How much does bronze angle weigh per foot?
| Size | Area (sq in) | lb per ft | kg per m | 12 ft length, lb |
|---|---|---|---|---|
| 1" x 1" x 0.125" | 0.2344 | 0.906 | 1.35 | 10.9 |
| 1.25" x 1.25" x 0.125" | 0.2969 | 1.147 | 1.71 | 13.8 |
| 1.5" x 1.5" x 0.125" | 0.3594 | 1.389 | 2.07 | 16.7 |
| 1.5" x 1.5" x 0.1875" | 0.5273 | 2.038 | 3.03 | 24.5 |
| 2" x 2" x 0.1875" | 0.7148 | 2.762 | 4.11 | 33.1 |
| 2" x 2" x 0.25" | 0.9375 | 3.623 | 5.39 | 43.5 |
| 3" x 3" x 0.25" | 1.4375 | 5.554 | 8.27 | 66.7 |
| 4" x 4" x 0.375" | 2.8594 | 11.049 | 16.44 | 132.6 |
Formula: area = thickness x (leg A + leg B minus thickness); weight = area x length x 0.322 lb/in3. Corner radii are ignored, so real stock runs one to three percent lighter than the table. For any other size use the metal weight calculator.
Cut and measure your stock
Frequently asked questions
How do you calculate the weight of bronze angle?
Multiply the cross-section area in square inches by the length in inches and by the density, 0.322 lb per cubic inch for bronze (932 bearing bronze). For this shape the area is: area = thickness x (leg A + leg B minus thickness). A foot of stock is 12 inches, so weight per foot is area x 12 x 0.322.
How does bronze compare with steel by weight?
Bronze is 14% heavier than carbon steel for the same size: 0.322 lb per cubic inch against 0.2836. The same bar or plate in bronze weighs 1.14 times the steel figure.
Other bronze shapes
Angle in other metals
Keep going
Weights from typical published densities; actual alloys and mill tolerances vary by a few percent. Not an engineering load calculation.