2" x 2" x 0.12" wall bronze square tube weighs 3.487 lb per ft (5.19 kg per m). Weight = cross-section area x length x 0.322 lb per cubic inch.
How much does bronze square tube weigh per foot?
| Size | Area (sq in) | lb per ft | kg per m | 12 ft length, lb |
|---|---|---|---|---|
| 0.75" x 0.75" x 0.065" wall | 0.1781 | 0.688 | 1.02 | 8.3 |
| 1" x 1" x 0.065" wall | 0.2431 | 0.939 | 1.40 | 11.3 |
| 1" x 1" x 0.12" wall | 0.4224 | 1.632 | 2.43 | 19.6 |
| 1.5" x 1.5" x 0.12" wall | 0.6624 | 2.560 | 3.81 | 30.7 |
| 2" x 2" x 0.12" wall | 0.9024 | 3.487 | 5.19 | 41.8 |
| 2" x 2" x 0.25" wall | 1.7500 | 6.762 | 10.06 | 81.1 |
| 3" x 3" x 0.1875" wall | 2.1094 | 8.151 | 12.13 | 97.8 |
| 4" x 4" x 0.25" wall | 3.7500 | 14.490 | 21.56 | 173.9 |
Formula: area = outside squared minus (outside minus 2 x wall) squared; weight = area x length x 0.322 lb/in3. Corner radii are ignored, so real stock runs one to three percent lighter than the table. For any other size use the metal weight calculator.
Cut and measure your stock
Frequently asked questions
How do you calculate the weight of bronze square tube?
Multiply the cross-section area in square inches by the length in inches and by the density, 0.322 lb per cubic inch for bronze (932 bearing bronze). For this shape the area is: area = outside squared minus (outside minus 2 x wall) squared. A foot of stock is 12 inches, so weight per foot is area x 12 x 0.322.
How does bronze compare with steel by weight?
Bronze is 14% heavier than carbon steel for the same size: 0.322 lb per cubic inch against 0.2836. The same bar or plate in bronze weighs 1.14 times the steel figure.
Other bronze shapes
Square tube in other metals
Keep going
Weights from typical published densities; actual alloys and mill tolerances vary by a few percent. Not an engineering load calculation.